Groupe d`emploi: Aciers non-alliés, Aciers alliés, Aciers inoxydables, Fonte, Fonte malléable, Alliages Cr-Ni, Aluminium, Alliages, Cuivre, Laiton, Bronze
Sur demande: Revêtement | exécution spéciale | diamètres intermédiaires | DIN 6535 HEK
| article | d m7 |
D h6 |
L | l | |
|---|---|---|---|---|---|
| AlTiSiN | |||||
| details | THPM 2.920-0100 | 1.00 | 3.00 | 55 | 8 |
|
|
|||||
| details | THPM 2.920-0110 | 1.10 | 3.00 | 55 | 12 |
|
|
|||||
| details | THPM 2.920-0120 | 1.20 | 3.00 | 55 | 12 |
|
|
|||||
| details | THPM 2.920-0130 | 1.30 | 3.00 | 55 | 12 |
|
|
|||||
| details | THPM 2.920-0140 | 1.40 | 3.00 | 55 | 12 |
|
|
|||||
| details | THPM 2.920-0150 | 1.50 | 3.00 | 55 | 12 |
|
|
|||||
| details | THPM 2.920-0160 | 1.60 | 3.00 | 65 | 16 |
|
|
|||||
| details | THPM 2.920-0170 | 1.70 | 3.00 | 65 | 16 |
|
|
|||||
| details | THPM 2.920-0180 | 1.80 | 3.00 | 65 | 16 |
|
|
|||||
| details | THPM 2.920-0190 | 1.90 | 3.00 | 65 | 16 |
|
|
|||||
| details | THPM 2.920-0200 | 2.00 | 3.00 | 65 | 16 |
|
|
|||||
| details | THPM 2.920-0210 | 2.10 | 3.00 | 74 | 20 |
|
|
|||||
| details | THPM 2.920-0220 | 2.20 | 3.00 | 74 | 20 |
|
|
|||||
| details | THPM 2.920-0230 | 2.30 | 3.00 | 74 | 20 |
|
|
|||||
| details | THPM 2.920-0240 | 2.40 | 3.00 | 74 | 20 |
|
|
|||||
| details | THPM 2.920-0250 | 2.50 | 3.00 | 74 | 20 |
|
|
|||||
| details | THPM 2.920-0260 | 2.60 | 3.00 | 81 | 23 |
|
|
|||||
| details | THPM 2.920-0270 | 2.70 | 3.00 | 81 | 23 |
|
|
|||||
| details | THPM 2.920-0280 | 2.80 | 3.00 | 81 | 23 |
|
|
|||||
| details | THPM 2.920-0290 | 2.90 | 3.00 | 81 | 23 |
|
|
|||||
Youtube